Lean Construction and Engineering Practice Based on Modular Assembly Integration

Chen Zhaorong; Zhang Jichao; Cai Zhili; Chen Wurong; Zeng Changluo

doi:doi:10.11648/j.sd.20221006.18

| Peer-Reviewed

Lean Construction and Engineering Practice Based on Modular Assembly Integration

Chen Zhaorong, Zhang Jichao, Cai Zhili, Chen Wurong, Zeng Changluo

Published in Science Discovery (Volume 10, Issue 6)

Received: 27 September 2022 Accepted: 16 November 2022 Published: 29 November 2022

Views: Downloads:

Download PDF

Share This Article

Twitter
Linked In
Facebook

Abstract

Prefabricated modular building is a new type of industrial building, The traditional buildings can be reasonably divided into modular units for streamlined production in the factory, then transported to the construction site or project construction site, and then assembled into a whole building through special connection methods and special equipment. and its technology has been gradually applied because of its green, low-carbon, ecological characteristics. In order to make it more efficient, low cost and good quality, the integrated system of design and construction is studied in this paper, and the design concepts of modular unit and modular film combination are put forward. This paper introduces the characteristics of modular assembly building from four aspects: engineering overview, design scheme, modular embodiment and lean construction, combined with the case of Changsha Makeshift Hospital and "mold and film combination" Fire-eye laboratory, and discusses several schemes of main modular unit design, equipment component prefabrication and quick and convenient installation. It has achieved the goals of flexible layout, rapid construction, cost reduction, resource waste reduction and environmental pollution reduction. And it is illustrated by a case that different small modules are combined to form products with different functions - Changsha Shelter Hospital and Gas Film Laboratory (mold film combination) are also products formed by modularization, and multiple small independent and interactive components are combined to realize the product functions that people need.

Published in	Science Discovery (Volume 10, Issue 6)
DOI	10.11648/j.sd.20221006.18
Page(s)	427-432
Creative Commons	This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.
Copyright	Copyright © The Author(s), 2022. Published by Science Publishing Group

Keywords

Unitized Modularization, Prefabricated, Mobile Cabin Hospital, Air Membrane Laboratory, Rapid Construction

References

[1]	曹虹剑, 张建英, 刘丹. 模块化分工、协同与技术创新——基于战略性新兴产业的研究 [J]. 中国软科学, 2015 (07): 100-110.
[2]	程贤福, 周健, 肖人彬, 刘俊杰, 游敏华. 面向绿色制造的产品模块化设计研究综述 [J]. 中国机械工程, 2020, 31 (21): 2612-2625.
[3]	冯艳英, 郝素利, 丁日佳. 企业标准化管理模式及运行机制研究 [J]. 中国科技论坛, 2014 (06): 77-82.
[4]	叶浩文, 樊则森, 周冲, 刘程炜. 装配式建筑标准化设计方法工程应用研究 [J]. 山东建筑大学学报, 2018, 33 (06): 69-74+84.
[5]	徐家麒. 预制装配式建筑精细化设计研究 [D]. 吉林建筑大学, 2013.
[6]	谢双双, 刘江华, 吴宇航. 预制装配式建筑施工技术的研究与应用 [J]. 中国住宅设施, 2022 (03): 25-27.
[7]	李德全, 郑翔. 我国建筑业设计施工一体化发展研究 [J]. 建筑, 2009 (07): 30-35.
[8]	刘俊峰, 翟晓辉, 向准, 赵靖, 张竞由, 王健. 应对新型冠状病毒肺炎疫情的方舱医院建设管理探讨 [J]. 中国医院管理, 2020, 40 (03): 12-14.
[9]	王当瑞, 马友才, 王春香, 郝爽, 董建锴. 武汉方舱医院问题分析及未来方舱建设思考 [J]. 建筑节能 (中英文), 2021, 49 (09): 166-170.
[10]	虞乔木, 郑东桦. 新冠肺炎疫情防控常态化研究 [J]. 中国公共安全 (学术版), 2020 (01): 65-68.
[11]	邹力行. 新冠肺炎疫情对全球的影响和启示 [J]. 东北财经大学学报, 2020 (04): 3-10.
[12]	吴俣, 刘珏, 刘民, 梁万年. 新型冠状病毒Omicron变异株的流行病学特征及防控研究 [J]. 中国全科医学, 2022, 25 (01): 14-19.
[13]	吴艳艳, 唐源. 医院智能化建设及其在智慧医疗发展中的作用 [J]. 医学信息学杂志, 2015, 36 (03): 38-41.
[14]	王乐楠. 基于结构特性的充气膜大空间设计与应用研究 [D]. 西安建筑科技大学, 2021.
[15]	李惠玲, 张越, 张龙淼, 王景春. 气膜结构工程施工质量控制研究 [J]. 建设监理, 2019 (03): 67-73.
[16]	陈戊荣, 陈兆荣, 苏运升, 李雯琪, 尹烨, 李若羽. 超短临时建筑核酸检测实验室设计若干技术研究 [J]. 建筑结构, 2022, 52 (S1): 704-708.
[17]	陈戊荣, 陈兆荣, 苏运升, 李雯琪, 尹烨, 温丽娟, 李若羽, 陈唯军. 气膜性建筑结构核酸检测实验室的创新设计研究 [J]. 建筑结构, 2022, 52 (S1): 698-703.
[18]	Chen Wurong, Su Yunsheng, Chen Zhaorong, Li Wenqi, Yin Ye, Wen Lijuan, Li Ruoyu, Chen Weijun. Innovative Practice of Key Technologies in Nucleic Acid Detection Laboratory of Gas Membrane Building Structure [J]. Science Discovery, 2022, 10 (1).

Cite This Article

Plain Text BibTeX RIS

APA Style

Chen Zhaorong, Zhang Jichao, Cai Zhili, Chen Wurong, Zeng Changluo. (2022). Lean Construction and Engineering Practice Based on Modular Assembly Integration. Science Discovery, 10(6), 427-432. https://doi.org/10.11648/j.sd.20221006.18

Copy | Download

ACS Style

Chen Zhaorong; Zhang Jichao; Cai Zhili; Chen Wurong; Zeng Changluo. Lean Construction and Engineering Practice Based on Modular Assembly Integration. Sci. Discov. 2022, 10(6), 427-432. doi: 10.11648/j.sd.20221006.18

Copy | Download

AMA Style

Chen Zhaorong, Zhang Jichao, Cai Zhili, Chen Wurong, Zeng Changluo. Lean Construction and Engineering Practice Based on Modular Assembly Integration. Sci Discov. 2022;10(6):427-432. doi: 10.11648/j.sd.20221006.18

Copy | Download

@article{10.11648/j.sd.20221006.18,
  author = {Chen Zhaorong and Zhang Jichao and Cai Zhili and Chen Wurong and Zeng Changluo},
  title = {Lean Construction and Engineering Practice Based on Modular Assembly Integration},
  journal = {Science Discovery},
  volume = {10},
  number = {6},
  pages = {427-432},
  doi = {10.11648/j.sd.20221006.18},
  url = {https://doi.org/10.11648/j.sd.20221006.18},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.sd.20221006.18},
  abstract = {Prefabricated modular building is a new type of industrial building, The traditional buildings can be reasonably divided into modular units for streamlined production in the factory, then transported to the construction site or project construction site, and then assembled into a whole building through special connection methods and special equipment. and its technology has been gradually applied because of its green, low-carbon, ecological characteristics. In order to make it more efficient, low cost and good quality, the integrated system of design and construction is studied in this paper, and the design concepts of modular unit and modular film combination are put forward. This paper introduces the characteristics of modular assembly building from four aspects: engineering overview, design scheme, modular embodiment and lean construction, combined with the case of Changsha Makeshift Hospital and "mold and film combination" Fire-eye laboratory, and discusses several schemes of main modular unit design, equipment component prefabrication and quick and convenient installation. It has achieved the goals of flexible layout, rapid construction, cost reduction, resource waste reduction and environmental pollution reduction. And it is illustrated by a case that different small modules are combined to form products with different functions - Changsha Shelter Hospital and Gas Film Laboratory (mold film combination) are also products formed by modularization, and multiple small independent and interactive components are combined to realize the product functions that people need.},
 year = {2022}
}

Copy | Download

TY  - JOUR
T1  - Lean Construction and Engineering Practice Based on Modular Assembly Integration
AU  - Chen Zhaorong
AU  - Zhang Jichao
AU  - Cai Zhili
AU  - Chen Wurong
AU  - Zeng Changluo
Y1  - 2022/11/29
PY  - 2022
N1  - https://doi.org/10.11648/j.sd.20221006.18
DO  - 10.11648/j.sd.20221006.18
T2  - Science Discovery
JF  - Science Discovery
JO  - Science Discovery
SP  - 427
EP  - 432
PB  - Science Publishing Group
SN  - 2331-0650
UR  - https://doi.org/10.11648/j.sd.20221006.18
AB  - Prefabricated modular building is a new type of industrial building, The traditional buildings can be reasonably divided into modular units for streamlined production in the factory, then transported to the construction site or project construction site, and then assembled into a whole building through special connection methods and special equipment. and its technology has been gradually applied because of its green, low-carbon, ecological characteristics. In order to make it more efficient, low cost and good quality, the integrated system of design and construction is studied in this paper, and the design concepts of modular unit and modular film combination are put forward. This paper introduces the characteristics of modular assembly building from four aspects: engineering overview, design scheme, modular embodiment and lean construction, combined with the case of Changsha Makeshift Hospital and "mold and film combination" Fire-eye laboratory, and discusses several schemes of main modular unit design, equipment component prefabrication and quick and convenient installation. It has achieved the goals of flexible layout, rapid construction, cost reduction, resource waste reduction and environmental pollution reduction. And it is illustrated by a case that different small modules are combined to form products with different functions - Changsha Shelter Hospital and Gas Film Laboratory (mold film combination) are also products formed by modularization, and multiple small independent and interactive components are combined to realize the product functions that people need.
VL  - 10
IS  - 6
ER  -

Copy | Download

Author Information

Chen Zhaorong

China Construction Fifth Engineering Bureau the Third Construction Co., Ltd. Changsha, China
Zhang Jichao

School of Civil Engineering, Guangzhou University, Guangzhou, China
Cai Zhili

China Construction Fifth Engineering Bureau the Third Construction Co., Ltd. Changsha, China
Chen Wurong

BGI Genomics Co., Ltd, Shenzhen, Shenzhen, China
Zeng Changluo

China Construction Fifth Engineering Bureau the Third Construction Co., Ltd. Changsha, China

Download PDF

Sections

Plain Text BibTeX RIS

APA Style

Chen Zhaorong, Zhang Jichao, Cai Zhili, Chen Wurong, Zeng Changluo. (2022). Lean Construction and Engineering Practice Based on Modular Assembly Integration. Science Discovery, 10(6), 427-432. https://doi.org/10.11648/j.sd.20221006.18

Copy | Download

ACS Style

Chen Zhaorong; Zhang Jichao; Cai Zhili; Chen Wurong; Zeng Changluo. Lean Construction and Engineering Practice Based on Modular Assembly Integration. Sci. Discov. 2022, 10(6), 427-432. doi: 10.11648/j.sd.20221006.18

Copy | Download

AMA Style

Chen Zhaorong, Zhang Jichao, Cai Zhili, Chen Wurong, Zeng Changluo. Lean Construction and Engineering Practice Based on Modular Assembly Integration. Sci Discov. 2022;10(6):427-432. doi: 10.11648/j.sd.20221006.18

Copy | Download

@article{10.11648/j.sd.20221006.18,
  author = {Chen Zhaorong and Zhang Jichao and Cai Zhili and Chen Wurong and Zeng Changluo},
  title = {Lean Construction and Engineering Practice Based on Modular Assembly Integration},
  journal = {Science Discovery},
  volume = {10},
  number = {6},
  pages = {427-432},
  doi = {10.11648/j.sd.20221006.18},
  url = {https://doi.org/10.11648/j.sd.20221006.18},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.sd.20221006.18},
  abstract = {Prefabricated modular building is a new type of industrial building, The traditional buildings can be reasonably divided into modular units for streamlined production in the factory, then transported to the construction site or project construction site, and then assembled into a whole building through special connection methods and special equipment. and its technology has been gradually applied because of its green, low-carbon, ecological characteristics. In order to make it more efficient, low cost and good quality, the integrated system of design and construction is studied in this paper, and the design concepts of modular unit and modular film combination are put forward. This paper introduces the characteristics of modular assembly building from four aspects: engineering overview, design scheme, modular embodiment and lean construction, combined with the case of Changsha Makeshift Hospital and "mold and film combination" Fire-eye laboratory, and discusses several schemes of main modular unit design, equipment component prefabrication and quick and convenient installation. It has achieved the goals of flexible layout, rapid construction, cost reduction, resource waste reduction and environmental pollution reduction. And it is illustrated by a case that different small modules are combined to form products with different functions - Changsha Shelter Hospital and Gas Film Laboratory (mold film combination) are also products formed by modularization, and multiple small independent and interactive components are combined to realize the product functions that people need.},
 year = {2022}
}

Copy | Download

TY  - JOUR
T1  - Lean Construction and Engineering Practice Based on Modular Assembly Integration
AU  - Chen Zhaorong
AU  - Zhang Jichao
AU  - Cai Zhili
AU  - Chen Wurong
AU  - Zeng Changluo
Y1  - 2022/11/29
PY  - 2022
N1  - https://doi.org/10.11648/j.sd.20221006.18
DO  - 10.11648/j.sd.20221006.18
T2  - Science Discovery
JF  - Science Discovery
JO  - Science Discovery
SP  - 427
EP  - 432
PB  - Science Publishing Group
SN  - 2331-0650
UR  - https://doi.org/10.11648/j.sd.20221006.18
AB  - Prefabricated modular building is a new type of industrial building, The traditional buildings can be reasonably divided into modular units for streamlined production in the factory, then transported to the construction site or project construction site, and then assembled into a whole building through special connection methods and special equipment. and its technology has been gradually applied because of its green, low-carbon, ecological characteristics. In order to make it more efficient, low cost and good quality, the integrated system of design and construction is studied in this paper, and the design concepts of modular unit and modular film combination are put forward. This paper introduces the characteristics of modular assembly building from four aspects: engineering overview, design scheme, modular embodiment and lean construction, combined with the case of Changsha Makeshift Hospital and "mold and film combination" Fire-eye laboratory, and discusses several schemes of main modular unit design, equipment component prefabrication and quick and convenient installation. It has achieved the goals of flexible layout, rapid construction, cost reduction, resource waste reduction and environmental pollution reduction. And it is illustrated by a case that different small modules are combined to form products with different functions - Changsha Shelter Hospital and Gas Film Laboratory (mold film combination) are also products formed by modularization, and multiple small independent and interactive components are combined to realize the product functions that people need.
VL  - 10
IS  - 6
ER  -

Copy | Download